Standard Designs

• Capable of being retrofitted for all other manufacturer types.
• Excellent for wide temperature range
• Resistant to most of the special lubricants and chemicals that destroy nitrile polyacrylates or silicones
• Superior performance and wear in heat and harsh environments
• Used in similar applications to nitrile but having an additional temperature and chemical resistance

For multi-lip designs, please consult our sales department.

• Capable of being retrofitted for all other manufacturer types
• Excellent for wide temperature range
• Very low coefficient of friction
• Outstanding resistance to modern day chemicals

For multi-lip designs, please consult our sales department.

• Capable of being retrofitted for all other manufacturer types
• This seal should normally be used for oils and greases
• Particular applications for retrofit
• For worn and poor shaft conditions
• Can be used for intermittent dry running

For multi-lip designs, please consult our sales department.

• Capable of being retrofitted for all other manufacturer types
• Excellent for most mineral oils and greases
• Design can be manufactured from 3 Bar to 10 Bar, 44 psi to 147 psi

For multi-lip designs, please consult our sales department.

• Capable of being retrofitted for all other manufacturer types
• Excellent for wide temperature range
• Absorbs lubricant, minimising friction and wear
• This material should not be used in dry running conditions

For multi-lip designs, please consult our sales department.